3M Respirator Kit Full Face 6800 Reusable Medium Plus 4 Particulate Filters 2097

Description: 3M Respirator Kit, Full Face 6800, Reusable, Medium, Plus 4 Particulate Filters 2097, P100 for Mold Remediation, Dust, Lead, Asbestos KIT INCLUDES: One 3M Full Face piece Reusable Respirator 6800, medium size, plus 2 pair (4 total) 3M Particulate Filters 2097 with 99. 97% filter efficiency meeting NIOSH P100-series test criteria.RESPIRATORY PROTECTION: 3M Filter 2097 helps protect against many oil and non-oil particulate contaminants and nuisance level odor from organic vapors such as mold, dust, lead, asbestos, cadmium, arsenic, and MDA.ENHANCED COMFORT: Lightweight, well-balanced, full face respirator design and silicone face seal for enhanced comfort and durability.BREATHE EASIER: 3M Cool Flow Valve helps provide cool, dry comfort; and the unique center adapter directs exhaled breath and moisture downward.LARGE LENS: Provides a wide field of view for excellent visibility. Integrated optical correction limits distortion as you look from left to rightEASY CLEANING: Smooth surface allows for quick and easy cleaning of the respirator.ANSI REQUIREMENT: Respirator meets requirements of ANSI Z87. 1-2010 for high impact (Z87+).For industrial/occupational use only. Not for consumer sale or use. From the brand3M Personal Protective Equip.At 3M, we are experts in helping keep your environment safe in a changing world. We develop our personal protective equipment (PPE) and other safety solutions based on decades of industry experience and a deep knowledge of industry standards, and extend our innovation to help keep your facilities, roads, and communities just as safe.From the manufacturerHelping You Wear It Right (always read and follow user instructions)Step 1Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.Step 2While holding the facepiece in place, pull the straps over your head.Step 3Tighten the two bottom straps and then tighten the two top straps.Step 4Make sure the back of the harness is centered on the back of the head.Perform a User Seal Check (always read and follow user instructions)Positive Pressure User Seal CheckPlace the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.Negative Pressure User Seal Check Using Particulate FiltersPlace your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.Negative Pressure User Seal Check Using CartridgesPlace palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Price: 240.38 USD

Location: Maspeth, New York

End Time: 2025-01-21T10:50:23.000Z

Shipping Cost: N/A USD