Description: These pushbutton stations were used for training: wiring up equipment at benches and operating for short periods of time. They're used, but in near-perfect condition. The glossy switch housing shows slight wear. Each station ships with 2 normally-open E22B2 Cutler-Hammer contact blocks and 1 normally-closed E22B1 Cutler-Hammer contact block. See specs on picture and in information below: The E22B1 is a 10A 1-pole Contact Block with screw terminals. It is suitable for use with Eaton E22 series pushbutton switches. 1NC contact configuration0.3N initial and 3.4N finial forceIP20 conforming to IEC 60529300000-cycle mechanical durabilityContact blocks are A600/Q600 rated per UL508 and AC15/DC13 rated per IEC 60947-5-1UL (NEMA) 1, 2, 3, 3R, 4, 4X, 12 & 13 and IEC IP 65 ingress protectionUL94V flammability ratingThe switch housing is 3.125" wide, 6.25" long and 0.75" deep. The black buttons protrude a hair more than 0.5" from the housing and the red button protrudes a hair less than 0.75". The buttons are 1" in diameter.
Price: 30 USD
Location: Monee, Illinois
End Time: 2025-01-20T23:25:37.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Custom Bundle: No
Current Type: AC/DC
Switch Style: Push Button/Retractive
Type: Contact Block
Brand: Eaton Cutler Hammer
