Genuine 10 oz SUBLIMATION Blank Stainless Steel Insulated Lowball Rocks Tumbler

Description: 10 oz. Stainless Steel insulated lowball mug features double-wall vacuum insulation with a clear sliding lid. It is 2X heat & cold resistant compared to a normal travel mug and is BPA and lead free. Made from 18/8 gauge stainless steel (18% chromium/8% nickel - also known as Type 304 Food Grade.) IN A CONVECTION OVEN (with Shrink Wrap): Note: Because not all ovens are created equally the dwell time in an oven can range from 3.5 to 4.5 minutes. Convection oven is recommended. Settings will vary depending on the oven brand and model ink and paper and atmospheric conditions. 2nd Note: Be sure that the artwork does not go beyond the size limits of the wrap. Supplies needed: - sublimatable substrate - sublimation transfer - shrink wrap - heat gun - heat tape - convection oven Oven settings: - temperature - 380-400 degrees F - dwell time - 3.5 to 4.5 minutes STEPS: 1. Position transfer onto the substrate using heat tape to secure the transfer to the substrate. 2. Place tumbler and transfer into shrink wrap cylinder. 4. Using the heat gun carefully direct hot air onto the shrink wrap until tight around the tumbler and transfer. 5. Place tumbler in oven with recommended settings listed above. 6. Pull from oven and remove wrap and paper. Caution contents will be hot use heat resistant gloves for safety. Tips: - If the image of the final product appears light increase the pressure or the dwell time slightly (30-45 seconds). - If the image on the final product appears blurred or substrate appears yellowed or has brown spots reduce the dwell time slightly (30-45 seconds). IN A CONVECTION OVEN (with Silicone Wrap - MGWRP7): Note: Because not all ovens are created equally the dwell time in an oven can range from 5 to 6 minutes. Convection oven is recommended. Settings will vary depending on the oven brand and model ink and paper and atmospheric conditions. 2nd Note: Be sure that the artwork does not go beyond the size limits of the wrap. Supplies needed: - sublimatable substrate (polar camel wine glass) - sublimation transfer - scratch paper - Silicone Wrap - heat tape - convection oven Oven settings: - temperature - 380-400 degrees F - dwell time - 5 to 6 minutes - pressure - light to medium STEPS: 1. Position transfer onto the substrate using heat tape to secure the transfer to the substrate. 2. Cut a piece of scratch paper to tape over your artwork transfer this protects your wrap from ink. 3. Use the silicone wrap to secure the transfer to the tumbler start wrapping the tumbler by stretching and rolling the silicone over top of itself. Make sure to start wrap in a non-artwork area to prevent a line in your artwork. 4. Put a piece of heat tape around silicone wrapped tumbler to secure wrap (may need long pieces of tape). 5. Place tumbler in oven with recommended settings listed above. 6. Pull from oven and remove wrap and paper. Caution contents will be hot use heat resistant gloves for safety. Tips: - If the image of the final product appears light increase the pressure or the dwell time slightly (30-45 seconds). - If the image on the final product appears blurred or substrate appears yellowed or has brown spots reduce the dwell time slightly (30-45 seconds).

Price: 8.75 USD

Location: Wichita, Kansas

End Time: 2025-01-19T00:55:07.000Z

Shipping Cost: N/A USD