Gibson Custom Shop M2M Les Paul Custom Satin Ebony Finish Nickel Hardware 10.00

Description: Gibson Custom Shop M2M Les Paul Custom Satin Ebony Finish Nickel Hardware 10.00 LBSLes Paul Custom, Nickel Hardware EbonyGibson Custom Select Les Paul Custom in satin Ebony(M2M Special Order), nickel hardware, 490R and 498T humbucking pickups, and ebony fingerboardThe Tuxedo Without the Gold JewelryThis Gibson Custom Select Les Paul™ Custom with nickel hardware is an understated adaptation of a classic. Made by the skilled craftspeople at the Custom Shop, Gibson Custom Select Collection guitars are made in small batches with hand-selected features. Exciting finishes and unique hardware are featured on modern and classic models, which makes each of these guitars special. Finished in a gloss Ebony nitrocellulose lacquer, this Les Paul Customs features nickel hardware instead of the usual gold hardware. Powering this Les Paul Custom is a set of 490R and 498T humbuckers, which offer versatility with modern tones on tap. The 490R neck pickup provides rhythm tones and utilizes an Alnico 2 magnet with a DC resistance of 8k. The 498T bridge pickup, which features an Alnico 5 magnet and clocks in with a DC resistance of 14.2k, is well-suited for high-gain tones. Between these two pickups, a wide variety of tones are available, from subtle clean tones from the neck pickup to all-out aggressive, distorted sounds courtesy of the bridge humbucker™. Adjust the CTS® audio taper potentiometers in the slightest amount, and the tones will gradually change, anywhere between zero and ten on the dial.This Les Paul Custom has all the usual features, from the multi-ply binding to the split diamond inlaid headstock. Another key identifier of a Les Paul Custom is the Mother of Pearl block inlays on the ebony fingerboard from the 1st fret all the way up the neck to the 21st fret. The Modern Medium C-Shape neck profile measures 0.82” at the 1st fret and 0.965” at the 12th fret. Thinner than some of the vintage-era neck profiles from the Historic Collection, this neck provides a modern playing experience. A bound ebony fingerboard with white binding and rolled fingerboard edges provides extra comfort while playing up and down the neck. The weight-relieved mahogany body sheds some heft off the guitar without sacrificing any of the tone. Nickel-finished Grover® Rotomatic® Kidney tuners provide rock-solid tuning stability while giving the guitar a modern appearance. All the plastics on the guitar are black, which includes the pickup rings, pickguard, Speed knobs, toggle switch washer, and control cavity covers.With the addition of nickel hardware, this Les Paul Custom is only available through Made to Measure and Gibson Custom Select. Featuring a gloss Ebony nitrocellulose lacquer finish, this Les Paul is still dressed up in the tuxedo, but without the gold jewelry. Included with the guitar is a Gibson Custom Certificate of Authenticity and a black hardshell case with a gold interior.Key FeaturesNickel Hardware490R and 498T PickupsLes Paul Modern Medium C-Shape Neck ProfileGrover Rotomatics TunersModelM2M Gibson Custom Shop Les Paul Custom SatinBuilderGibson Custom Shop M2MYear2024Body TypeSolid BodyTop WoodMapleBody WoodMahoganyFinish TypeSatinFinish ColorEbonyBack FinishSatinBindingmulti-ply bindingNeck WoodMahoganyFingerboardEbonyNeck CarveMedium C-ShapeScale Length24.75", 62.865cmNeck Dimensions.818'' - .963''Neck Radius12'Frets22- Medium JumboNut Width1.687", 42.85mmNut MaterialCorianNeck FinishSatinInlaysMother of Pearl BlocksHeadstockLes Paul Custom HeadNeck Pickup490RBridge Pickup498TPickguardBlack Multi-PlyHardwareNickelBridgeTune-O-MaticTunersGrover KidneyControls2 500K CTS Volume Pots, 2 500K CTS Tone Pots, Hand-Wired Harness , Switchcraft Toggle SwitchExtrasCustom Shop Long Neck TennonCaseGibson Custom Shop Black Hard-Shell CaseWeight10.00 LBS

Price: 5999 USD

Location: Pasadena, California

End Time: 2024-11-30T00:16:26.000Z

Shipping Cost: 0 USD