WIFI PID TEMPERATURE CONTROL CONTROLLER, SSR, W/ DUAL ALARM, 1/16 DIN SIZE

Description: The AW-SYL-2352 is a Wi-Fi-capable PID controller based on Auber's popular SYL-2352 1/16 DIN PID controller. This unit not only does everything a regular SYL-2352 does but also has 2.4 GHz Wi-Fi connectivity, which allows a user to access the controller remotely through the AuberWifi phone app anywhere that has an internet connection. Wi-Fi Connectivity Features:The AuberWIFI app is available for both iOS and Android systems. Monitor the current sensor reading, view the data plot, and export historical data.Monitor the status of the main output, and the alarm relays.Access and change all parameters from the app. Receive alarm notifications pushed to your phone. Easy pairing process. Compatible with most modern routers with 2.4 GHz WiFi bands. Manage multiple AuberWIFI (AW) series devices in one app. Capable of receiving updates over-the-air (OTA). AuberWifi device list page. Manage multiple devices in the same app. The device page for AW-SYL-2352, where a user can monitor the PV, SV, output status, and see the data plot. Basic Features of SYL-2352This PID controller has a dual-line display and is 1/16 DIN size (1.89" x1.89" or 48 mm x 48 mm). The temperature management of industrial equipment, laboratory equipment, espresso machines, beer brewing systems, BBQ grills/smokers, heat treatment ovens, glass kilns, and aquariums are just a few common uses for this controller. The controller employs a PID algorithm with advanced artificial intelligence that is capable of handling systems that are often slow or challenging to operate with a traditional PID controller. The temperature will be maintained by the controller within a tolerable range of the default PID settings. The auto-tune feature will increase control stability and precision to within one degree. Most of the time, users don't need to toggle the perplexing PID parameters in order to stabilize the system. More than twenty different input sensors/devices are supported by this industrial-grade PID controller with excellent precision and full features, covering practically all application needs. There are more than ten programmable ways to trigger two alarm outputs. Even when the controller is turned off, all of the control and setting parameters are kept in its non-volatile memory. When using a thermocouple sensor, recently incorporated advanced cold junction compensation circuits substantially reduce temperature drift. This unit has 12VDC output for controlling an external solid-state relay (SSR).Features:PID control with a fuzzy-logic enhancement for outstanding stability control0.2% accuracy over the entire input rangeDisplays in either Fahrenheit or Celsius temperature unitPercent output indication for easy troubleshooting of the systemSupports both heating and cooling modeAuto/manual control with bump-less transferDual alarm outputs with 10+ activation methods/situationsSelectable security access levelsHigh brightness, large LED display - easily read from a distanceManual, technical support, and 6 month warrantyMain SpecificationsInput type(Note 2)TC: K, E, S, WRe, J, T, B, N RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm. DC voltage : 0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC current: 4~20mA.Input rangeK (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF), Pt100 (-320~1100ºF), Cu50 (-60~300ºF). Linear input: -1999~+9999 defined by a user.DisplayTwo lines, Four digits. °F or °C.Display Resolution1°C and 0.1 °C. or 1°FAccuracy±0.2% or ±1 unit of the full input rangeControl modeFuzzy PID, Manual control, On-OffOutput mode12 V DC for external solid-state relay (SSR)AlarmProcess high/low alarm, deviation high/low alarmAlarm outputRelay contact (Resistive): 1A at 240VAC, 3A at120VAC, or 3A at 24VACPower supply voltage rating85~265 VAC / 50~60HzMounting cutout1.77" x 1.77" (45 x 45 mm), 1/16 DINOverall dimension1.89" x 1.89" x 3.94" (48 x 48 x 100 mm) Wi-Fi Connectivity SpecificationsWireless Standards2.4 GHz, IEEE 802.11 b/g/nSecurity ProtocolsWPA/WPA2/WPA2-Enterprise Note 1. Main default settings on the controller:Input sensor type: Type K thermocouple (SN = 0). Temperature unit: Fahrenheit (°F) Display resolution: 1 degree. Note 2. The current AuberWIFI app offers limited support for linear input sensor types such as DC voltage and DC current input signals. The app fully supports all compatible temperature sensor types. Note 3. Optional spade connectors.

Price: 109.99 USD

Location: Alpharetta, Georgia

End Time: 2023-12-28T14:59:53.000Z

Shipping Cost: N/A USD